1. Pre-owned Shocks, Struts & Assemblies Parts
  2. sku: 9308274157657883
  3. HONOR CARPARTS HON825122S01

HONOR-CARPARTS HON825122S01 Air Suspension Spring Bags W01-358-7897 Contitech Hendrickson S23114

W01-358-7897 Honor-carparts Hon825122s01 Pair Air Suspension Spring Bags For Contitech Hendrickson S23114

( Brand: Honor-carparts ), ( Manufacturer Part Number: HON825122S01 ), ( Placement On Vehicle: Left, Right, Front, Rear ), ( Type: Air Suspension Spring ), ( Fitment Type: Direct Replacement ), ( Size: Single Dimension Cm 24.00 Length 24.00 Width 24.00 Height ), ( Single Weight Kg : 3.960 ), ( Upper Mounting Isolator Included: No Isolator Required ), ( Upper Mount Type: Stud ), ( Included Hardware: Mounting Hardware ), ( Drive Layout: Universal ), ( Custom Bundle: Yes ), ( Material: Iron, Aluminium Alloy, Rubber ), ( Quantity: Pair ), ( Manufacturer Warranty: 1 Year ), ( Oe Spec Or Performance/custom: Oe Spec ), ( Features: Sealed ), ( Ipn: W01-358-7897 )

Review HONOR CARPARTS Pair Air Suspension Spring Bags For Contitech Hendrickson

The Honor CarParts HON825122S01 Air Suspension Spring Bags are specifically designed to fit Contitech Hendrickson S23114 W01-358-7897. These spring bags are an essential component of the air suspension system in heavy-duty vehicles, ensuring a smooth and stable ride.

Each spring bag is made of high-quality, durable materials that can withstand the rigors of commercial use. The outer casing is constructed from heavy-duty rubber, providing excellent protection against the elements and road debris. The inner bag is crafted from strong, flexible fabric that allows for proper air compression and decompression.

The dimensions of these air suspension spring bags match perfectly with the Contitech Hendrickson S23114 W01-358-7897. Each bag measures approximately 22.8 inches in length, 9.8 inches in width, and 8.7 inches in height. The total capacity of each bag is 32.4 gallons, allowing for ample air volume to support the vehicle's weight and maintain a consistent ride height.

Installation of these air suspension spring bags is a straightforward process. They can be easily removed from the vehicle and replaced with new ones when necessary. Simply disconnect the electrical connector, deflate the air spring, and remove the old bag. Once the new bag is installed and the electrical connector is reconnected, the air spring can be inflated to the recommended pressure.

These Honor CarParts HON825122S01 Air Suspension Spring Bags are an excellent choice for fleet managers, owner-operators, and commercial vehicle maintenance professionals seeking reliable and affordable replacement parts for their Contitech Hendrickson S23114 W01-358-7897 air suspension systems. With their high-quality construction, precise fit, and easy installation, these spring bags will help ensure your vehicles are always in top condition, providing a safe and comfortable ride for drivers and passengers alike.

The Honor Carparts Hon825122S01 air suspension spring bags are aftermarket replacements for the original Contitech Hendrickson S23114 W01-358-7897 spring bags. These parts are suitable for various heavy-duty vehicles, including those manufactured by Daimler, Mercedes-Benz, and Freightliner. Here are some pros and cons of buying these aftermarket suspension spring bags:

Pros:

1. Cost-effective: Aftermarket suspension spring bags, such as the Honor Carparts Hon825122S01, are generally more affordable than their OEM counterparts. This makes them an attractive option for vehicle owners looking to save money on repairs.

2. Availability: Aftermarket suspension spring bags are often more readily available than their OEM counterparts, especially from online retailers. This can save vehicle owners time and hassle when trying to source the necessary parts for their repairs.

3. Functionality: Aftermarket suspension spring bags are designed to meet or exceed the performance of their OEM counterparts. In the case of the Honor Carparts Hon825122S01, they are specifically engineered to be a direct fit replacement for the Contitech Hendrickson S23114 W01-358-7897 spring bags.

Cons:

1. Quality concerns: Some aftermarket parts, including suspension spring bags, may not meet the same quality standards as their OEM counterparts. While the Honor Carparts Hon825122S01 are designed to be high-quality, there is always a risk that the parts may not perform as well as the original equipment.

2. Warranty: Aftermarket suspension spring bags may not come with the same level of warranty coverage as OEM parts. This means that vehicle owners may be taking on more risk when purchasing aftermarket parts.

3. Installation: Installing aftermarket suspension spring bags may require more effort than installing OEM parts. This is because aftermarket parts may not fit as snugly or may require some adjustments to ensure proper function.

Ending Conclusion:

The Honor Carparts Hon825122S01 air suspension spring bags offer a cost-effective and readily available alternative to their OEM counterparts. However, there are some potential drawbacks, such as quality concerns and warranty coverage. Ultimately, the decision to purchase aftermarket suspension spring bags, such as the Honor Carparts Hon825122S01, comes down to the individual vehicle owner's priorities and budget. If saving money is a priority, then aftermarket suspension spring bags may be the best option. However, if peace of mind and a longer warranty are more important, then OEM suspension spring bags may be the better choice.

Recommendation:

If you are looking for a cost-effective alternative to OEM suspension spring bags and are comfortable with the potential risks and limitations of aftermarket parts, then the Honor Carparts Hon825122S01 air suspension spring bags may be a good option for you. However, if you prioritize peace of mind and a longer warranty, then it may be worth considering OEM suspension spring bags instead. Ultimately, it's important to weigh the pros and cons carefully and make an informed decision based on your specific needs and budget.

Details:

Incorrectly folded air springs found on vehicles during pre-delivery inspection or after use must be installed new. Refer to the procedure. 2.Using the scan tool, vent air springs. 1.NOTE: The vehicle must be positioned on a suitable lifting device prior to deflating the air suspension system.

Any rear spring which is unfolded must be refolded prior to being installed in a vehicle. Air Suspension Structure. Providing air entrance for the part. 4.Detach the air spring from rear axle.

Removal Warning Notice. Includes at least four plies, or layers, of material an inner layer, two plies cord-reinforced fabric, and outer layer. With the vehicle in NEUTRAL, position on a hoist until wheel and tire assemblies are slightly above ground. 1, Air suspension spring bags installed on the Truck, Coach and Trailer are designed usually as generic types.

Provides lower mounting arrangement for the hairspring in form of tapped holes or studs. Blind Nut, A permanent part of the bead plate assembly providing an alternate mounting system to stud. The heart of an Aired spring

Prevents excessive damage to vehicle and suspension in the case of sudden air pressure loss. When installing a new air spring, care must be taken not to apply load the suspension until springs have been inflated using spring fill procedure. Combo Stud, Combination mounting stud and air fitting. Vent all air pressure from the suspension system prior to disconnecting or removing any components.

ContiTech FD20022524 FD20023A709. Boxes, APO/FPO or Military Mail Box. 3, You can distinguish specific model of air suspension spring bags on your Auto truck/Heavy-Duty Truck/Touring Car/Passenger Coach/Trailer by checking original SPN Supplier Part Number listed as below, all which has a consistent one-to-one match with Firestone Number. New List Item.

5.Remove the air spring in following sequence. 2 press the quick connect locking ring and pull out air tube. 3.Remove the air spring retainer. Piston Bolt, Attaches the piston to bellows assembly.

An incorrectly folded air spring could rupture, altering the handling characteristics of vehicle. Bumper Optional, A solid molded rubber fail-safe device used on many suspension applications. Extended, in some cases, to serve as a means of attaching the spring suspension. If a vehicle has been driven with an incorrectly folded air spring, new spring must be installed.

Girdle Hoop, A ring between the convolutions of convoluted type air spring. Stud, A permanent part of the bead plate assembly used to attach hairspring suspension. 1.Disconnect the air spring solenoid electrical connector. After inflating an air spring in the hanging position, it must be inspected for correct shape.

Firestone OEM Number. Do not attempt to inflate any air spring which has been collapsed while un inflated from the rebound hanging position jounce stop. Any air spring which is unfolded must be refolded prior to being installed in a vehicle. The air spring refolding procedure should only be used for an which has never supported the vehicles weight while in incorrectly folded position.

part #: hon825122s01 price

  • $399.63

specifications shockseek:

  • brand: Honor-carparts
  • mpn: Hon825122s01
  • placement on vehicle: Left, Right, Front, Rear
  • type: Air Suspension Spring
  • fitment type: Direct Replacement
  • size: Single Dimension Cm 24.00 Length 24.00 Width 24.00 Height
  • single weight kg : 3.960
  • upper mounting isolator included: No Isolator Required
  • upper mount type: Stud
  • included hardware: Mounting Hardware
  • drive layout: Universal
  • custom bundle: Yes
  • material: Iron, Aluminium Alloy, Rubber
  • quantity: Pair
  • manufacturer warranty: 1 Year
  • oe spec or performance/custom: Oe Spec
  • features: Sealed
  • ipn: W01-358-7897

general shockseek:

  • condition: New
  • Car Truck Parts Accessories > Steering Suspension > Shocks, Struts Assemblies

shipping shockseek:

  • type: Fixed
  • transit: 4-8 Days
  • service: Standard
  • class: Standard
  • cost: $0.00

offer shockseek:

  • options: Ship-to-home
  • best offers: True
  • started: July 25, 2025
  • availability: In Stock
  • sold: 0
  • quantity: 10

returns shockseek:

  • policy: Returns Accepted
  • paid by: Seller
  • time: 30 Days

seller shockseek:

  • rating: 98.3%
  • city: Ontario, California
  • # reviews: 449

payments shockseek:

  • wallet: Apple-pay
  • credit card: Diners-club
  • other
placement on vehicle: left, right, front, rear, type: air suspension spring, fitment type: direct replacement, size: single dimension cm 24.00 length 24.00 width 24.00 height, single weight kg: 3.960, upper mounting isolator included: no isolator required, upper mount type: stud, included hardware: mounting hardware, drive layout: universal, custom bundle: yes, quantity: pair, manufacturer warranty: 1 year, oe spec or performance/custom: oe spec, features: sealed,
category: auto parts > car truck parts accessories > steering suspension > shocks, struts assemblies, material: iron, aluminium alloy, rubber, sku: 9308274157657883,

Honor-carparts HON825122S01 Is Similar To:

shockseek logo
1 offer $399.63 USD
  • Offer #1: $399.63 price + $0.00 shipping estimate = $399.63* total. BMW 7-Series G11 G12 740 745 750 760 . 2, VIN(Vehicle Identification Number) consists of total 17 English letters and arabic digits.FREE SHIPPING

Copyright © shockseek.com