CARMASUSPENSIONS CA841504S01 Front Struts Spring Tierod Sway Bar

( Brand: Carmasuspensions ), ( Manufacturer Part Number: CA841504S01 ), ( Manufacturer Warranty: 10 Year ), ( Fitment Type: Direct Replacement ), ( Placement On Vehicle: Left, Right, Front ), ( Adjustable: No ), ( Custom Bundle: Yes ), ( Kit Or Single Part: Kit ), ( Type: Strut Coil Spring Assembly ), ( Items Included: Quick Struts Assembly ), ( Bundle Description: Shock Struts, Sway Bar End Links ), ( Finish: Polished, Rust Protected ), ( Included Hardware: Mounting Hardware ), ( Oe Spec Or Performance/custom: Oe Spec ), ( Features: Sealed ), ( Shipment: Split )

Review CARMASUSPENSIONS For Hyundai Kia Front Struts Spring Tierod Sway Bar fits TUCSON SPORTAGE 2005–2009

Introducing the Carmal Suspension CA841504S01 front strut assembly, specifically designed for the 2005-2009 Hyundai Tucson and Kia Sportage. This premium suspension component is engineered to provide superior performance and durability for your vehicle.

The CA841504S01 front strut assembly is a complete unit that includes the strut, spring, and top mount. The strut is a high-performance monotube design, which offers excellent damping performance and stability. The monotube design allows for greater oil capacity, resulting in improved heat dissipation and consistent damping performance.

The spring in this assembly is a heavy-duty, twin-tube design that provides excellent ride quality and handling. The spring rate is specifically tuned for the 2005-2009 Hyundai Tucson and Kia Sportage, ensuring a perfect fit and optimal performance. The springs are also designed to last, with a durable construction that can withstand the rigors of daily driving.

The top mount in this assembly is a high-quality rubber design that provides a secure and precise connection between the strut and the vehicle body. The mount is designed to minimize noise and vibration, resulting in a smooth and comfortable ride.

Additionally, this front strut assembly includes a replacement sway bar end link. The sway bar end link connects the sway bar to the control arms, allowing the vehicle to maintain proper body roll control during cornering. The replacement end link is made from durable materials and is specifically designed to fit the 2005-2009 Hyundai Tucson and Kia Sportage.

Installing the CA841504S01 front strut assembly is a straightforward process that can be completed in your garage with common tools. The assembly comes with clear installation instructions and all necessary hardware. By upgrading your front struts with this premium Carmal Suspension component, you can improve the handling, ride quality, and overall performance of your 2005-2009 Hyundai Tucson or Kia Sportage.

Buying Carmasuspension CA841504S01 for 2005-2009 Hyundai Tucson and Kia Sportage: A Comprehensive Analysis

The Carmasuspension CA841504S01 is a front strut assembly that includes spring, tierod, and sway bar for both 2005-2009 Hyundai Tucson and Kia Sportage. This component upgrade can enhance the vehicle's handling, ride comfort, and overall performance. In this analysis, we will discuss the pros and cons of purchasing a Carmasuspension CA841504S01 front strut assembly.

1. Improved Handling: The Carmasuspension CA841504S01 offers better handling capabilities due to the upgraded sway bar and struts. This results in a more responsive and stable driving experience.

2. Enhanced Ride Comfort: The new front struts provide improved ride comfort by reducing unwanted vibrations and bouncing. This results in a more enjoyable driving experience.

3. Durability: The Carmasuspension CA841504S01 is designed to be more durable than the original equipment. This means fewer replacements and reduced maintenance costs over time.

4. Value for Money: Compared to the cost of replacing each component separately, the Carmasuspension CA841504S01 offers excellent value for money.

1. Installation Complexity: Installing the Carmasuspension CA841504S01 front strut assembly can be a complex process. It may require professional installation or extensive DIY experience.

2. Potential Foralignment Issues: After installation, the vehicle may experience slight alignment issues due to the change in suspension components. This may require additional alignment adjustments, which could incur additional costs.

3. Cost: While the Carmasuspension CA841504S01 offers excellent value for money in the long run, the initial cost may be higher than some other aftermarket alternatives.

The Carmasuspension CA841504S01 front strut assembly is an excellent investment for those who desire improved handling, enhanced ride comfort, and long-term durability for their 2005-2009 Hyundai Tucson or Kia Sportage. Despite the installation complexity and potential alignment issues, the benefits of this upgrade outweigh the drawbacks. Moreover, the value for money and durability make it a worthwhile investment for vehicle enthusiasts.

If you are looking to upgrade the suspension components of your 2005-2009 Hyundai Tucson or Kia Sportage, the Carmasuspension CA841504S01 front strut assembly is an excellent choice. While the installation process may be complex, the benefits far outweigh the drawbacks. For those without extensive DIY experience, it is recommended to seek professional installation to ensure proper alignment and optimal performance.

Details:

You should repair it at this time to avoid abnormal operation of the shock absorbed. Tip:Always check both stabilizer links and replace them in pairs if necessary. When tightening the nuts of connecting part, it should be carried out in natural state tire and meet specified parameters vehicle. 3.What are the benefits after replacing shock absorbed.

Extend body life, prevent spring damage and improve braking effect. Buffer conveys shock to drivers and passengers in order improve ride comfort reduce fatigue. Check the quality status of new shock absorbed, such as whether there is oil leakage in appearance, etc.

1.Fitting the Following vehicle: HYUNDAI TUCSON 2005 - 2009 All model's. Observe the vehicle manufacturer specifications. 9.Reinstall front wheels. 2.Package Includes: 1x Complete Front Strut Coil Spring Assembly - Driver Side 172220.

5.Loosen the upper fastening nut of stabilizer link at suspension strut and remove it. 1.Can I Drive With a Broken Strut. 4.Press stabilizer link out of torsion bar. All nuts should be new and tightened according to the specified parameters of vehicle ensure that tightening torque connection part meets.

3.Loosen the lower fastening nut of stabilizer link at and remove. Picture A, Note: Cleanliness is extremely important when working on the power steering. 2.Can worn shocks or struts cause my new tires to wear unevenly. Please observe the tightening torque suggested by vehicle manufacturer.

Suppressing the rapid vibration of wheels while driving, preventing tires from leaving road surface and improving driving stability. During the assembly process, be sure to protect surface of piston rod, and avoid using tools pull rod or bump scratch otherwise shock absorbed will leak oil. KIA SPORTAGE 2005 - 2010 All model's. Ball Joint Replacement Guideline.

2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. Ing noises during sudden steering movements can also be symptoms of a defective tie rod. 1.Raise vehicle and remove front wheels. If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends inner rods.

The side of the front axle from which vibration noise is emanating can already be determined during a test drive. The following methods can be used to check whether the shock absorbed works well. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to contact surface. Tie-Rod End Replacement Guideline.

Lower the vehicle and tighten wheel studs to tightening torque specified by manufacturer. Absolutely: shocks and struts provide damping force to control tire movement. Tip:If the ball stud also starts to turn, hold it with a suitable tool. In order to determine the exact cause and replace defective tie rod, car must be elevated with a vehicle lift in examined more closely.

Newly Listed. If the temperature is not high enough, it means that there no resistance inside shock absorbed and does work. Note:Always use new self-locking nuts and bolts for a reliable repair. Note:During mounting, the ball stud should not turn within joint.

Precautions for replacing the shock absorbed. If there is a knocking or clunking noise in the area of front axle when car traveling over road bumps, potholes curbs, then usually defect component wheel suspension. Complete Strut Assembly Structure. 7.Insert new stabilizer link at suspension strut.

Road conditions and driving habits can contribute to the wear of these bushings which will become worn fall apart. Improving driving stability and adjust ability, effectively conveying engine defalcation pressure to the ground, so as save fuel costs. 6.Press stabilizer link at suspension strut out of bracket. 7.Push the bellow towards tie rod end.

Press the bumper firmly, and then release it. If the sway bar stabilizer link is found to be defective, it should replaced as described below. Removal and Installation Guideline. In fact, the replacement frequency will vary depending on car condition, road condition and shock absorbed manufacturer.

2.Spray the fastening nut of tie rod end with rust remover and leave it on for a few minutes. 2.To loosen the fastening screws and fixing nuts of compression ball joint more easily, spray them with rust remover allow to act for a few minutes. A strut is a suspension component that dampens an automobiles movements and prevents it from bouncing on its springs. This can cause damage inside the ball joint and lead to early failure.

At this time you should know if it is to replace the shock absorbed. Struts are often expensive to replace, but driving on a broken strut is not good idea. Tip:If the ball stud rotates, hold in place with a hexagon socket. Recommended replacement cycle.

1.Lift the vehicle and dismount front axle wheels. This useful tip applies to the exchange of tie rod ends and inner rods, which together form so-called. Sway Bar Stabilizer Link Replacement Guideline. When the tires move excessively, they develop a cupping wear pattern that damages tire.

These bushing can be inspected by raising the car up and looking for an irregular. 1x Complete Front Strut Coil Spring Assembly - Passenger Side 172219. 8.Tighten stabilizer link at suspension strut to the tightening torque specified by vehicle manufacturer. Note:When performing the test drive, pay special attention to handling while cornering and listen for possible noise emission.

Other factors such as incorrect air pressure, worn suspension components or improperly aligned steering also causes uneven tire wear. 9.Insert new stabilizer link at. Pay special attention to the surface of piston not be bumped. 6.Loosen the compression ball joint on steering knuckle using a suitable special tool.

5.Remove the tie rod end from steering knuckle using an appropriate ball joint separator. When installing a new shock absorbed, you should pay attention to whether the model matches, please matching list before purchasing, and confirm left right are correct. Tip:Secure the ball stud against twisting with a suitable tool. 9.Clean the sealing face of bellow at steering gear.

The type of noise also already provides certain indications for maintenance regarding which components might be faulty. Pay attention to whether the installation position between shock absorbed and body car is correct.

part #: ca841504s01 price

• $164.32

specifications shockseek:

• for models: Tucson, Sportage
• for makes: Hyundai, Kia
• for years: 2005-2009
• brand: Carmasuspensions
• mpn: Ca841504s01
• manufacturer warranty: 10 Year
• fitment type: Direct Replacement
• placement on vehicle: Left, Right, Front
• adjustable: No
• custom bundle: Yes
• kit or single part: Kit
• type: Strut Coil Spring Assembly
• items included: Quick Struts Assembly
• bundle description: Shock Struts, Sway Bar End Links
• finish: Polished, Rust Protected
• included hardware: Mounting Hardware
• oe spec or performance/custom: Oe Spec
• features: Sealed
• shipment: Split

seller shockseek:

• city: Ontario, California
• # reviews: 13621
• rating: 98.9%

shipping shockseek:

• service: FedEx Ground Economy
• transit: 3-7 Days
• class: Economy
• carrier: FedEx
• type: Fixed
• cost: $0.00

payments shockseek:

• other
• credit card: Visa
• wallet: Apple-pay

offer shockseek:

• availability: In Stock
• sold: 0
• best offers: True
• options: Ship-to-home
• started: September 15, 2025
• quantity: 5

returns shockseek:

• time: 30 Days
• policy: Returns Accepted
• paid by: Seller

general shockseek:

• Car Truck Parts Accessories > Steering Suspension > Shocks, Struts Assemblies
• condition: New

Carmasuspensions CA841504S01 Is Similar To:

• Carmasuspensions Ca13255201ns 2pcs Front Complete Struts And Coil Spring Assemblies For 2014-2018 Kia Forte Koup (48.4% similar) When the tires move excessively, they develop a cupping wear pattern that damages tire. At this time you should know if it is to replace the shock absorbed. If the temperature is not high enough, it means that there no resistance inside shock absorbed and does work. In fact, the replacement...(April 23rd, 2026)