1. Pre-owned Shocks, Struts & Assemblies Parts
  2. sku: 5871846432494611
  3. MOOG 12793DPJS

MOOG 12793DPJS Front Strut Rod Bushing Kit

fits model: Belvedere. make: Plymouth. year: 1966–1970.

12793dpjs Moog For 1966-1970 Plymouth Belvedere Strut Rod Bushing Kit Front 1967

( Brand: Moog ), ( Manufacturer Part Number: 12793DPJS ), ( Part Type: Rod Bushing ), ( Placement On Vehicle: Front ), ( Manufacturer Warranty: 12 Month Warranty ), ( Notes: Suspension Strut Rod Bushing Kit Standard Design ), ( Years: 1966 1967 1968 1969 1970 ), ( Application: Plymouth Belvedere Strut Rod Bushing Kit ), ( Product Name 2: Suspension Strut Rod Bushing Kit ), ( Cs-sku: 400 )

Review MOOG For Plymouth Strut Rod Bushing Kit Front fits BELVEDERE 1966–1970

The Moog 12793DPJS Strut Rod Bushings Kit is specifically designed for the front suspension of 1966-1970 Plymouth Belvedere models. This kit is an essential upgrade for those seeking to restore or enhance the performance of their classic vehicles.

The strut rod bushings are a critical component of the front suspension system. They connect the strut rod to the steering knuckle and control the lateral movement of the wheel during steering. Over time, these bushings can wear out or degrade, leading to unwanted wheel movement and suspension instability.

Moog's 12793DPJS Strut Rod Bushings Kit is engineered to provide superior performance and durability. Each bushing is made from high-quality, advanced polymer material that offers excellent resistance to wear, tear, and vibration. The material used in these bushings is specifically engineered to provide a precise and consistent fit, ensuring proper wheel alignment and improved handling.

The kit includes four (4) strut rod bushings, which are easy to install and do not require any special tools. The installation process is straightforward, and the bushings can be replaced in a relatively short amount of time. Moog's step-by-step installation instructions make the process even more straightforward for the DIY enthusiast.

By upgrading your vehicle with Moog's 12793DPJS Strut Rod Bushings Kit, you'll experience improved steering response, increased stability, and better overall handling. The kit is also backed by Moog's limited lifetime warranty, ensuring peace of mind and long-term performance.

In summary, Moog's 12793DPJS Strut Rod Bushings Kit is an essential upgrade for any 1966-1970 Plymouth Belvedere owner seeking to restore or enhance the performance of their classic vehicle. The high-quality bushings offer superior durability, easy installation, and significant improvements in handling and stability. With Moog's limited lifetime warranty, you can trust that your investment in this kit will provide long-term performance and reliability.

Moog 12793DPJS is a strut rod bushing kit specifically designed for the front suspension of 1966-1970 Plymouth Belvedere vehicles, including the 1967 model. Replacing the factory strut rod bushings with Moog's improved parts can offer several benefits, but it's essential to weigh these advantages against the cost to determine if the upgrade is worth it for your particular application.

Pros:

1. Enhanced Handling: New bushings can help reduce wheel hop and improve handling by maintaining proper wheel alignment.

2. Reduced Noise and Vibration: Worn-out bushings can cause unwanted noise and vibration, which can be eliminated with the installation of new ones.

3. Improved Ride Quality: New bushings can lead to a smoother, more comfortable ride.

4. Longer Service Life: Moog bushings are engineered to provide superior durability and resistance to wear, offering a longer service life compared to OEM parts.

5. OE-Quality: Moog bushings are designed to meet or exceed OE specifications, ensuring a proper fit and function.

Cons:

1. Cost: Aftermarket strut rod bushings, like the Moog 12793DPJS, tend to be more expensive than OEM parts.

2. Installation Complexity: The installation process for strut rod bushings can be complicated, requiring the use of specialized tools and techniques.

3. Time Commitment: Replacing strut rod bushings is a labor-intensive task that may require a significant investment of time.

4. Potential for Damage: During the installation process, there is a risk of damaging other suspension components if the procedure is not performed correctly.

Conclusion:

The decision to purchase and install Moog 12793DPJS strut rod bushing kit for your 1967 Plymouth Belvedere depends on your priorities and budget. If you value improved handling, reduced noise, better ride quality, and increased durability, then the investment in Moog's aftermarket bushings could be worthwhile. However, if you're on a tight budget or are not concerned about these advantages, it may be more cost-effective to stick with OEM parts. Ultimately, the choice is yours, and careful consideration of the pros and cons will help guide your decision.

Recommendation:

If you decide to proceed with the purchase and installation of Moog 12793DPJS strut rod bushings for your 1967 Plymouth Belvedere, ensure that you have the necessary tools, skills, and expertise to perform the job correctly. If you're unsure, consider seeking the assistance of a professional mechanic to ensure a successful outcome. Additionally, always confirm that the kit is compatible with your specific vehicle model and year before making a purchase.

Details:

12 Month Warranty Fitment Notes: Vehicle: 1966-1970 Plymouth Belvedere. Elastic compounds do not utilize any reground rubber fillers. Bushings assembled with proper pre compression for ultimate in performance and feel. Parts Geek - For 1966-1970 Plymouth Belvedere Strut Rod Bushing Kit Front Moog 12793DPJS 1967: Review Fitment Notes to Ensure Proper Fit Position: condition: New Brand: Notes: Suspension Standard Design Meets or Exceeds OEM Specs: Yes Features: Manufactured from high quality elastic compounds for durability and ride performance.

part #: 12793dpjs price

  • $28.21

specifications shockseek:

  • for models: Belvedere
  • for makes: Plymouth
  • for years: 1966-1970
  • brand: Moog
  • mpn: 12793dpjs
  • part type: Rod Bushing
  • placement on vehicle: Front
  • manufacturer warranty: 12 Month Warranty
  • notes: Suspension Strut Rod Bushing Kit Standard Design
  • years: 1966 1967 1968 1969 1970
  • application: Plymouth Belvedere Strut Rod Bushing Kit
  • product name 2: Suspension Strut Rod Bushing Kit
  • cs-sku: 400

returns shockseek:

  • paid by: Buyer
  • policy: Returns Accepted
  • time: 14 Days

seller shockseek:

  • rating: 95.1%
  • # reviews: 256934
  • city: Washington, District Of Columbia

shipping shockseek:

  • transit: 3-8 Days
  • service: Economy
  • class: Economy
  • cost: $0.00
  • type: Fixed

general shockseek:

  • Car Truck Parts Accessories > Steering Suspension > Shocks, Struts Assemblies
  • condition: New

offer shockseek:

  • started: February 24, 2025
  • options: Ship-to-home
  • availability: In Stock
  • sold: 0
  • quantity: 1

payments shockseek:

  • credit card: Mastercard
  • wallet: Paypal
  • other
for models: belvedere, for makes: plymouth, for years: 1966-1970, part type: rod bushing, placement on vehicle: front, manufacturer warranty: 12 month warranty, notes: suspension strut rod bushing kit standard design, years: 1966 1967 1968 1969 1970, application: plymouth belvedere strut rod bushing kit, product name 2: suspension strut rod bushing kit, cs-sku: 400,
category: auto parts > car truck parts accessories > steering suspension > shocks, struts assemblies, sku: 5871846432494611,

Moog 12793DPJS Is Similar To:

shockseek logo
1 offer $28.21 USD
  • Offer #1: $28.21 price + $0.00 shipping estimate = $28.21* total. Bushings assembled with proper precompression for ultimate in performance and feel 1966-1970 Plymouth Belvedere.FREE SHIPPING

Copyright © shockseek.com